Why Is My Water Heater Leaking? 7 Causes & When to Call a Plumber in McAllen
Published · Updated
Quick answer
Turn off the cold water valve above the heater and the power or gas. Leaks from the T&P valve, drain valve or pipe connections are usually repairable. Water coming from the tank itself means the tank has failed and needs replacing. There is no service fee for us to come out to a leaking water heater — we check it and give you an upfront price before any work.
Check out our online pricing
Other plumbers won't tell you the price. We will.
Water Heater Repair
Standard $260–$490Website Special $225–$425You save up to $65Calling? Just say 'Website Special.'Current Website Special
Book online or mention the Website Special when you call and you pay the Website Special price shown above.
How the Website Special worksFinancing available for qualified homeowners.
Walking into the garage and spotting a puddle under your water heater is one of those sinking-feeling moments. Your first thought is probably, "Is this going to flood my house?" Your second thought: "How much is this going to cost me?"
Take a breath. Not every water heater leak means a full replacement. Some are simple fixes. Others are warning signs that your unit is about to fail completely. The key is knowing which one you're dealing with — and what to do in the next 15 minutes to protect your home.
At All Valley Plumbing & A/C Co., we've been repairing and replacing water heaters in McAllen, Mission, Edinburg, and across the Rio Grande Valley since 1984. Here's what every homeowner needs to know.
Water heaters leak for one of three main reasons: a failed component (like a valve, drain, or connection), pressure or temperature issues inside the tank, or corrosion that has eaten through the tank itself.
Component leaks can usually be repaired for $225–$425. Tank corrosion almost always means a full replacement ($1,763–$2,963). The longer water sits on the floor, the more damage to your home — so the first step is always shutting off the water and calling a licensed plumber.
Before we diagnose, stop the damage:
- Turn off the water supply to the heater. There's a cold water shut-off valve directly above the unit. Turn it clockwise until it stops.
- Turn off the power. For gas units, turn the thermostat to "Pilot" or "Off." For electric units, flip the breaker at your electrical panel.
- Move anything off the floor nearby. Boxes, laundry, anything porous.
- Call a licensed plumber. Don't try to diagnose while water is actively leaking.
The T&P valve is a safety feature that releases water if the tank pressure or temperature gets too high. When it fails, it can drip constantly or release water in bursts. Signs include water running down the side of the tank from a valve near the top, or water in the discharge pipe.
Our posted repair prices: $225–$425
The drain valve is at the bottom of the tank. Over time — especially with McAllen's hard water — mineral buildup corrodes it. You'll see water pooling directly under the valve.
Our posted repair prices: $225–$425
The cold water inlet and hot water outlet pipes at the top of your tank can loosen over time or corrode at the fittings. A flashlight will show moisture or mineral stains at these connection points.
Our posted repair prices: $225–$425
If your home's water pressure is too high, it stresses every component on your water heater. This often causes the T&P valve to release water. In the RGV, high municipal water pressure is surprisingly common.
Our posted repair prices: $225–$425 (may require pressure regulator)
Hard water leaves mineral deposits in the bottom of your tank. Over years, these deposits overheat, crack the glass lining, and eventually rust through the steel. This is a common issue in the Rio Grande Valley because of our hard water.
If tank is cracked from inside: $1,763–$2,963 replacement
The anode rod is a sacrificial metal rod that corrodes INSTEAD of your tank. Once it's fully corroded (usually 3–5 years in McAllen), the tank itself starts rusting. Replacing the rod before this happens can extend your water heater's life by 5–10 years.
Anode replacement: $225. Tank replacement if too late: $1,763–$2,963
If water is seeping from the tank itself — not a valve, not a connection, but the actual side or bottom of the tank — the unit is done. Steel tanks rust from the inside out. Once you see it outside, there's no repair. Replacement is the only option.
Water heater replacement in McAllen: $1,763–$2,963 installed
Here's the honest rule of thumb we use when diagnosing water heaters for customers in McAllen and the RGV:
Usually a repair:
- Water dripping from a valve (T&P, drain valve)
- Moisture at pipe connections
- Water heater is under 10 years old
- No visible rust on the tank itself
Usually a replacement:
- Water seeping from the bottom or sides of the tank
- Water heater is 10+ years old
- Visible rust on the outside of the tank
- You've already repaired it once in the last 2 years
- Water is rusty or smells bad
Call right away if:
- Water is actively leaking and you can't stop it
- You smell gas near the unit (gas models) — get out of the house and call immediately
- The leak is coming from the tank body, not a valve
- Your hot water has stopped working
- There's any visible electrical damage (electric models)
At All Valley Plumbing & A/C Co., our licensed plumbers diagnose water heater leaks with honest, upfront pricing — you know the cost before we start. We offer same-day service throughout McAllen, Mission, Edinburg, Pharr, San Juan, Alamo, Weslaco, and Harlingen.
- Service fees: Leaking water heater: no service fee to come out. We check it and give you an upfront price before any work. Not heating, no hot water, or another water heater repair: $45 service fee, waived when you approve the repair.
- Valve / component repair: $225–$425
- Water heater replacement — Website Special: $1,763–$2,963
Financing available. 1-year workmanship warranty on all repairs and installations.
How long do water heaters last in McAllen?
Traditional tank water heaters last 8–12 years on average, but McAllen's hard water tends to shorten that to the lower end of the range. Flushing the tank once a year helps it reach the longer end.
Can I use my water heater if it's slowly leaking?
No. Even a slow leak means pressure or component failure. Keep using it and you risk sudden tank rupture, major water damage, and potentially electrical or gas hazards. Shut it off and get it diagnosed.
How soon should I deal with a leaking water heater?
If water is actively flowing or pooling, shut off the water supply and the power or gas right away. If it's a slow drip you can contain with a bucket, book the next same-day slot (Monday-Friday, 8:00 AM-5:30 PM) — arrange service promptly. Water damage and mold can set in quickly.
How much does water heater replacement cost in McAllen?
Tank water heater replacement — Website Special: $1,763–$2,963 installed, depending on tank size, gas vs. electric, and access. We provide upfront flat-rate pricing before any work begins.
Does homeowners insurance cover a leaking water heater?
Insurance usually covers water DAMAGE from a sudden leak (like damaged floors or walls), but rarely the water heater itself. Check your policy. Document everything with photos.
Get Same-Day Water Heater Service in McAllen
Family-owned and serving the Rio Grande Valley since 1984. Licensed and insured, with reviews on Google. Upfront pricing, no surprise fees, financing available.
Call All Valley Plumbing & A/C Co. at (956) 686-6656 for same-day service.
Related: Water Heater Replacement | Water Heater Service
Frequently asked questions
- Can a leaking water heater be repaired?
- Often, yes. Leaks from the T&P valve, drain valve or connections are usually repairable. A leak from the tank body means the tank needs replacing.
- How much does water heater repair cost in McAllen?
- Our posted Website Special price for water heater repair is $225–$425. You see the price online and approve it before any work starts.
- Is there a service fee to come out for a water heater?
- Leaking water heater: no service fee to come out. We check it and give you an upfront price before any work. Not heating, no hot water, or another water heater repair: $45 service fee, waived when you approve the repair.
